AVProEdge have now launched their Video Over IP solution called MXNet. It supports Full fat 4K with all forms of HDR 10 Year Warranty Their own 24 and 48 port switches 10G uplink ports on their switches to allow cascading of switches Fibre SFP ports direct
A protection diode is one of a few suppression devices for electronic door hardware. It is a standard semiconductor device integral to the safe and proper function of the access control system, it acts as a grounding tool, allowing the flow of ...
To do this you need access to the Web GUI of the MXNet POE switch. The 24 and 48 port switch have a management port. First you must set the management port of the MXNet POE switch to a valid IP address for your network. You can view the KB article ...
You can read the EDID from an output you want with the following command on the console page: GET OUTx HP EDID DATA : Get HDMI Output x EDID DATA{x=[1~4]} GET OUTx TP EDID DATA : Get HDBT Output x EDID DATA{x=[1~4]} Then you can load any EDID block ...
Control4 does not have the ability to extract audio from HDMI, their control system treats HDMI as a video only source. So to extract audio, you have to trick Control4 by using dummy bindings. Luckily they seem to know this is a problem, and have ...