Armour Home
Armour Home Support Portal
            Knowledge Base QAcoustics Q Acoustics Positioning Speakers

            Matching your loudspeakers with the location within a room.

            The 2000/i, 3000/i and Concept series loudspeakers are rear ported and designed to work best with some space behind them i.e. 200mm or so away from the rear wall. If you position your loudspeakers close to a wall/corner, then the foam bungs (supplied) should be inserted into the rear ports otherwise there could be too much bass. This gives you the ability to adjust the response in one speaker at a time, depending upon the wall boundaries around it. Ensure the bungs are fitted snugly into the port without inserting them too far. You will find the level of bass is reduced but definition and bass extension is increased. Experiment to see what you prefer and try making small changes to the position of the speaker to optimise the final result.

            Helpful?  
            Help us to make this article better
            0 0