Q Media M2 - Q. What are the size of the Q m2 feet and can they be removed?
Answer:
The feet are like a shallow cone and are 25mm high. The diameter where each foot is attached to the Q m2 is 55mm and the diameter of its rubber inset foot is 23mm. Because of the downward facing enhanced bass driver, the Q m2 cannot be used with the feet removed.
Related Articles
7000i - Q. What size are the rubber feet and spiked feet for the 7000ST stands?
Answer: The spike length is 2.3cm, the screw thread is 0.5mm The black round rubber feet are 1cm diameter The screw thread is 0.5mm
What are the distances of the feet on the Q m2?
The full Width x Depth dimensions of the Q Acoustics m2 is 550mm x 340mm. The rear feet have 445mm between centres, and front feet are 390mm between centres. The distance between the front and rear feet is 225mm to the centres. The diameter of the ...
Q Media M2/M3 - Q. How do I optimise the sound of my soundbar/soundbase?
Answer: You can optimise the sound quality of the M2 soundbase or M3 Soundbar by first selecting the placement position switch that reflects where you have physically located the base or bar. Use the EQ switch on the back of the to select the ...
3000/3000i Series - Feet, Fixings and Stands
3000(i) Feet & Fixings The foot thread on 3010, 3020 & 3090C is M4 The thread for the spikes and feet on the 3030FSI & 3000ST stands, 3050 & 3050i loudspeakers is M6 (thread pitch 1.0mm) The thread for fixing the wall bracket is M8 3010i Feet ...
2000i Series - Feet, Fixings and Stands
2010i, 2020i Feet The feet on the 2010i and 2020i accept an M4 thread. 2050i Feet The threaded insert used for spikes is M6. An alternative solution for stability and sound quality is to replace the feet with a material like Bostik Blue Tack. Office ...