Q. What cables will I need to connect my 5.1 loudspeaker package and why are they not supplied with it?
Answer:
You will need loudspeaker cables for each loudspeaker and a phono to phono RCA cable to connect the subwoofer to the amplifier. We don't sell these as part of the package, as we don't know what length you're likely to require.
Related Articles
Q Acoustics M20 HD Loudspeaker User Manual
Instructions for the setup, use and care of your Q Acoustics M20 HD active speakers.
E120 - Q. Can I use a subwoofer with this system?
Answer: E120 can be used with speakers and a subwoofer. You will need an amplified subwoofer with a gain and crossover control, most powered subwoofers will have this, and all Q Acoustics powered models have these facilities. You will need an ...
Q. Which cables should I use with my Q Acoustics loudspeakers?
Answer: QED is our sister company and we always recommend it as many of the products have been developed together with Q Acoustics. In order of priority, we would always recommend using the best single wire speaker connection you can afford. We ...
Q. What are the rules with matching loudspeaker cable lengths?
Answer: The longer the length of speaker cable, the more impact the length has on the resistance and general quality of the signal transmission. In our own testing and general reports (probably the same ones you have been looking at) it was found ...
Q. How should I position my subwoofer?
Answer: Firstly, safety is the most important thing. Position the subwoofer so that you won't trip over it (or the cables connecting it). If this means you still have a choice of positions then, without altering any volume levels, try it in the ...