Loading the rotary parameters from Lightburn software / Daniel
To Load the file that has the parameters for the rotary attachment follow the next steps
Check this video to check the procedure
Step 1
Go to Edit menu and click on Machine settings
Step 2
Click on read button
Step 3
Click on "load from file" button and select the rotary parameters file
Step 4
Click on Write button to finish
Note:
in the next link, you can download the parameters for the rotary
Related Articles
CO2 Versa Rotary Attachment Configuration: 4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary Models / Daniel
CO2 Machine Rotary Attachment Configuration: 4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary Models The Rotary Attachment Configuration: (4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary) receive a signal from the Y axis, generating the ...Install Smartcarve software for RDXXXX-YM controller / Daniel
To Install Smartcarve software for the machine follow the steps Step 1 Download the Smartcarve Software version 4.3.29 from this Link https://www.dropbox.com/sh/m1jouuqhcmu5tld/AACGQfsUv18cuJ30ONQ9nayCa?dl=0 Step 2 Disable the antivirus software Step ...LOAD FACTORY PARAMETERS OR DEFAULT FOR RUIDA RDC6442 / Daniel
LOAD FACTORY PARAMETERS OR DEFAULT RUIDA RDC6442 To load the default configuration from the operation panel, follow these steps: 1. Press the Z/U key 2. With the direction arrows move and select the option “Set default para” and ...CONNECTING THE ROTARY ATTACHMENT VIDEO AND PARAMETERS / Stefhany
CONNECTING THE ROTARY ATTACHMENT To make the connection please check the following video: https://www.youtube.com/watch?v=jL6oeJ7UFvw NOTE: Initially it is recommended to save the user parameters as shown in the previous video. In the following ...4 pin aviation plug size GX20 to connect the rotary in the star machine / Daniel
GX20 5/8" or 16mm is the size for the 4 pin aviation plug 4 -pin Male plug diameter 15mm 4-pin female plug 15mm GX20 Dimensions and Pins Position for the GX20 Male & Female plug