4KHDMI Factory Reset Button

4KHDMI Factory Reset Button

The following can help you recover the 4KHDMI device if the unit is on the latest firmware:

Reset Network to DHCP on Device
~ press and hold for 20+ secs. - reverts back to DHCP on a selected NIC
Reset Network to DHCP and Device Interface back to ETH (RJ-45)
~ press and hold until the LCD screen goes black. Then wait 30 seconds and then power cycle the unit. - reverts back to DHCP and RJ45


    • Related Articles

    • Mini Factory Reset

      If you need to perform a factory reset on a BirdDog Mini, follow these directions: ~ power the unit on. ~ After the unit has powered on for a few minutes, press and hold the reset button (on the side) for 5 seconds.  ~ Release the button after 5 ...

    • 4KQUAD Factory Reset Button

      The following can help you recover the 4KQUAD device if the unit is on the latest firmware: Reset Network to DHCP on Device ~ press and hold for 20+ secs. - reverts back to DHCP on a selected NIC Reset Network to DHCP and Device Interface back to ETH ...

    • 4KSDI Factoy Reset Button

      The following can help you recover the 4KSDI device if the unit is on the latest firmware: Reset Network to DHCP on Device ~ press and hold for 20+ secs. - reverts back to DHCP on a selected NIC Reset Network to DHCP and Device Interface back to ETH ...

    • Play - Factory Image Process

      Firmware Factory Image Instructions BirdDog PLAYThe following is the complete factory re-image process. Please read and follow the instructions carefully. Failure to do so may cause the device to become unrecoverable. What You’ll Need a. PC running ...

    • Studio-NDI · Factory Image Process (REV4)

      The following is the complete factory re-image process. This process should fix: Studio devices that are "Stuck on Startup"  Startup and get stuck on the "IP scroll" during bootup  WebUI menu screens are corrupt and not displaying correctly.  Please ...