Here is a link to installing RipPro C5 for the DTG Viper: http://youtu.be/x6lDCIe9_zo Here is a link to optimizing RipPro C5 for the DTG Viper: http://youtu.be/EH2ufZ4nsCE
When the machine cannot detect when the Swing Gun is up or down, and error message will appear on screen indicating this. The attached document will help you diagnose the cause of the issue and how to correct it.
When Digitizing small text of 0.25" or smaller, special techniques should be used to get the best sew out result possible. The attached document will explain the technique to be used and why you should use them.
INSTRUCTIONS: This procedure will not effect your validation if done correctly. You must have your Product Code when reinstalling DTG RIP Pro. If any mistake is made when entering your Product Code you will lose your validation and will need to ...
What is an ERROR 100 (Main Shaft is not at the Fix Position) and how to clear it. Reasons and Solutions: A. IMPORTANT: Consult the Main Drive System pages of the Parts Manuel that came with your machine for further help with parts numbers. On a 601c, ...
The most common reason for thread pull outs onembroidery machines is improper tension. Look at the back of the design and you can determine this by the ratio of upper thread and bobbin thread showing in the back of the design. For instance, if on the ...