KP800 Master Code not being reset

• Related Articles

• Knowledge base 136: Changing a Downstream (RS-485) iNet into a Master iNet.

  This document explains how to change an iNet door controller from being on the RS-485 bus into a Master controller. In the following screenshots, the downstream iNet with bus address #1 on the “Ground Floor” Master will be changed to a Master called ...

• Knowledge base 107: Using SQL Backup Master to backup and restore SQL Databases.

  The following Bulletin explains how to install and configure SQL Backup Master to backup and restore SQL databases. Installing SQL Backup Master & Creating a Backup 1. Download SQL Backup Master from the following link – ...

• Knowledge base 142: Resetting an IP address - Sigma Series

  If you have lost the IP address of your biometric reader, you will need to reset the IP address using a memory stick. With newer readers, you will require a memory stick as well as a micro usb (male) to usb (female) adapter. Older readers  - such as ...

• Knowledge base 201: Moving Identity Access server to another machine

  Checking your Identity Access License When moving Identity Access from one machine to another it is important to check if the current Identity Access server has a Professional or Enterprise license and what version the software is currently running. ...

• Knowledge base 208: How to tell the difference between the KP800 Models

  There are two different models of the KP800 that have different programming procedures.   The new model with a curved peak on the black facia and terminal wiring block connectors.     The older model with a high peak on the black facia with a pigtail ...