Knowledge base 170: Biometric enrollment recommendations
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Any additional questions please contact support@controlsoft.com
Related Articles
Knowledge base 169: Setting up MorphoManager with Sigma series readers in Biometric only mode
This bulletin explains how to install and configure MorphoManager with Sigma series readers for either Standalone mode or ACU mode (for use with access control systems). Equipment required - 1. PC/Server running the following spec - Processor: Dual ...Knowledge base 105: MorphoManager Pin Only or Pin + Biometric with Sigma/Sigma Lite+
This bulletin will explain how to configure the Sigma / Sigma Lite + Reader to work in Pin Only mode or Pin + Biometric. Pin Only *Note – This will display the users pin on the display screen when access is granted, this can be disabled by following ...Knowledge base 97 : MorphoManager with Sigma Multi – Mifare CSN 34 Bit (IA-MFC) or Biometrics
It is possible in MorphoManager to set up the MA Sigma Series readers in a Biometric or Mifare CSN mode. This bulletin will explain how to configure the system to where a user can present a card or their biometric under the same profile; and how to ...Knowledge base 102: MorphoManager with MA Sigma iClass series – HID iClass (Standard 26bit) + Biometrics
It is possible in MorphoManager to set up the MA Sigma/ Sigma Lite Series readers in a Biometric + HID iClass mode. This bulletin will explain how to configure the system where a user must present a card & their biometric before being allowed access. ...Knowledge base 178: Identity Access 9 - Sigma series reader with an LCD display for Pin & Biometric
This KB explains how to create a custom Biometric profile for a Sigma Series reader (LED Model required) for Pin & Bio using Identity Access version 9. This KB is based on the Biometric reader being wired into an i-Net Plus V3 door controller and ...