An IPv4 error will be shown under the Morpho reader settings when a customer attempts to add an IDEMIA reader using the readers hostname instead of an IPV4 address. The error is shown below and can only be resolved by entering an IP V4 address -
SETTING UP A MORPHO BIOMETRIC READER WITH AN I-NET CONTROLLER This document will cover how to set up a Morpho biometric reader with an I-Net controller using the direct integration in Identity Access. What you will need: Morpho Biometric reader ...
This KB explains how to create a custom Biometric profile for a Sigma Series reader (LED Model required) for Pin & Bio using Identity Access version 9. This KB is based on the Biometric reader being wired into an i-Net Plus V3 door controller and ...
This feature requires an IA-PRO license if you do not have an IA-PRO license please contact sales@controlsoft.com The following KB describes the 3 ways of configuring a Sigma series biometric reader with a Wiegand in reader for either 1) Wiegand IN ...