IDEMIA BioBridge Integration with MorphoWave Compact XP/SP Editing or enrolling a user via BioBridge produces the following LIBFOFT License not found error : The name of a MorphoWave Compact must be entered int othe "Contractless Finger biometric ...
To update MorphoManager to V15.4.3 a two stage update is required for versions of MorphoManager less than 14.6.1. Firstly you must upgrade to V14.6.1 and then onwards to V15.4.3, this is as per the IDEMIA installation guide. Requirements - ...
This Document was created using MorphoManager V15.4.3.5 and hasn’t been verified on any other versions. Create / Edit a Biometric Device Configuration so the reader knows to looks for both Biometrics and HID Prox Card simultaneously. 1. ...
Scenario: Using Mifare Classic & EMProx combination cards with an Omnikey 5427CK to encode cards with MorphoManager. Problem: When encoding the cards you can occasionally see this error when writing or erasing the card - Solution: Log into the ...
This article explains how to set up MorphoManager to encode cards using the HID Omnikey 5427 CK G2 reader. Requirements: Hardware - HID Omnikey 5427 CK G2 Drivers - Omnikey EEM Driver - https://www.hidglobal.com/drivers/34881 Omnikey CCID Driver ...
MorphoManager requires the following ports be allowed through a firewall where needed - TCP - 42100 - MorphoManager software communication. TCP - 11010 - Morpho biometric device communication.
This bulletin explains how to install and configure MorphoManager with Sigma series readers for either Standalone mode or ACU mode (for use with access control systems). Equipment required - 1. PC/Server running the following spec - Processor: Dual ...
This bulletin explains how to read the physical access control number (PACS) from HID SEOS Cards on the MorphoWave compact MDPI reader. If you wish to encode biometrics to a SEOS card please contact support@controlsoft.com to discuss. Equipment ...
This bulletin explains how to use the Morpho Wave series reader for 2 factor (card + bio) or 3 factor (card + bio+ pin). Equipment required - MorphoManager 14.6.0 (or newer) MorphoWave Compact reader (Firmware 1.2.2 or newer) Morpho MSO 300/1300 ...
It is possible in MorphoManager to set up the MA Sigma/ Sigma Lite Series readers in a Biometric + HID iClass mode. This bulletin will explain how to configure the system where a user must present a card & their biometric before being allowed access. ...
It is possible in MorphoManager to set up the MA Sigma Series readers in a Biometric or Mifare CSN mode. This bulletin will explain how to configure the system to where a user can present a card or their biometric under the same profile; and how to ...
This bulletin will explain how to configure the Sigma / Sigma Lite + Reader to work in Pin Only mode or Pin + Biometric. Pin Only *Note – This will display the users pin on the display screen when access is granted, this can be disabled by following ...
Introduction BioBridge is an enrollment and synchronization middleware that overlays enrollment and demographic synchronization between MorphoManager and third-party data sources. The infrastructure is extensible and supports interfacing to multiple ...
When installing MorphoManager Server for the first time you are presented with a screen called Usage requirements which defines the type of database used - "Microsoft SQL Server Compact Edition 4.0" or "Microsoft SQL Server 2005 Express or greater" ...
Occasionally when configuring Biobridge in MorphoManager, you can get an error message displayed when clicking save, this relates to obtaining the configuration from Lenel and has been observed when the Lenel database is stored on the same machine as ...