ABOUT the CPR Call Blocker Protect+

ABOUT the CPR Call Blocker Protect+

This is the CPR Call Blocker Protect + model. 

This Call Blocker has been designed by us at CPR specifically for the elderly or very vulnerable.

These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they are added 
to a Whitelist. 

This Call Blocker is the best to purchase for the elderly or very vulnerable to give them complete protection and peace of mind. For numbers that are needed to come through, they can be simply added to the call blocker via a 
simple code:

* * 8 # (beep) [FULL NUMBER] # (beep).

Then, and only then will that programmed number get through to you.

CPR CallBlocker Protect+ User Guide

    • Related Articles

    • CPR Call Blocker APP for Android

        Adding Contacts to the Blocklist ✎   Upon starting the app your blocklist will be blank by default. There are a variety of ways to add a number to the blocklist,  accessible via the ‘+ ADD‘ button above the  ‘ Blocklist‘ tab icon. You can choose ...
    • ABOUT CPR Call Blocker Protect +

      This is the CPR Call Blocker Protect + model.  This Call Blocker has been designed by us at CPR for the elderly or very vulnerable.  These Call Blockers are designed to BLOCK EVERY call that comes through to a customer's line, unless they are ...
    • Does the call blocker block incoming calls made from VOIP or cell phones?

      Yes. The Call Blocker can block any number originating from anywhere. Some phone companies don't block calls from cell phones, but the Call Blocker does.
    • CPR Call Blocker Protect+ Programming Codes

      IMPORTANT - WHEN PROGRAMMING THE CALL BLOCKER PROTECT + YOU WILL ALWAYS HEAR THE BT OPERATOR SAYING YOUR CALL CANNOT BE COMPLETED AS DIALLED. THIS IS NORMAL WITH THE PROTECT + AS THE LINE IS LEFT OPEN FOR MANUAL PROGRAMMING OUR END IF NEEDED. SIMPLY ...
    • Blocking all calls or dropping after 1 or 2 rings

      Problem The call blocker is blocking all incoming calls or they are dropping off after one or 2 rings Reasons for this There is two possible causes of this: Caller ID is not active or not transmitting through to the call blocker There is too much ...