I have Ooma phone service and it causes an invalid CID to display. Can I fix this?
YES. The problem lies within the Ooma "gingle" Dial tone. To fix this, go to your Ooma login.
Login and select Preferences then Devices, On the Devices Preferences screen find the little Blue Gear, below the device picture, usually the Telo unit. Click on the Blue Gear, Select EDIT. On the Edit Device screen Select the Dial Tone pull down arrow Select Regular and Save.
What is the difference between digital service and landline phone service?
DIGITAL phone service is like AT&T's U-verse, Frontier, Fairfield, and Wind Stream phone services, VoIP broadband analog adapters for Ooma, Vonage, Magic Jack, etc. Note that actual IP digital phone sets requiring DHCP service will not work with ...
Will the call blocker work with VOIP services like: Vonage, Ooma or Magic Jack as my phone service provider?
Yes! Vonage, Ooma and Magic Jack are internet based phone services that use an Ethernet Analog Telephone Adapter (ATA) which provides you with a Phone port. Your phone is connected there now but you will simply disconnect your phone and connect the ...
I recently changed my phone service and none of my blocked calls are being stopped; What happened?
If you recently changed your phone service from a 10 digit service (POTS or regular landline) to an 11 digit service (like Vonage, ATT Uverse, VoIP) you may have noticed that the Call Blocker now doesn't work like it used to. This is because the ...
Will the call blocker work with DSL Internet service through my phone line which requires a filter on each phone connection?
Yes the Call Blocker works with DSL but you have to have the DSL filter on the line if you have it running through the entire house. Normally, the DSL computer signal is routed directly to the DSL modem and at the same location, a single DSL filter ...
How do I make phone calls from the CPR Guardian II watch?
Swipe right once, tap on the phonebook. There you can see yours contacts. To call - press and hold 2 second on contact.