How do I use Attract Mode?

How do I use Attract Mode?

The Attract mode phase is a time when the photo booth is idle and not in use. You can use Attract Mode to display any one of several things on the screen during this idle time to help advertise or "attract" people to use it.

Video - To play a short video clip you can add your video in the Device Control section of Global Settings (see below). When the booth is not in use for more than 2 minutes it will play the video full screen and can be set to loop. Touching the screen will cause the video to go away and go to right to the ready screen.



Still Image or Slideshow - You can use the Slideshow feature to display either the photo strips, the individual images or a series of images in a saved folder. You can do these in combination or singly using the slideshow options. In the Slideshow tab select the option you want and choose the Attract Mode option for where to display. This will also start after 2 minutes of idle time and go away when they touch the screen.


    • Related Articles

    • Adding an Attract Mode Video

      Download Halloween Attract Mode Video Here is a jpg if you would like to have a matching screen template.
    • How do I use the Burstmode (Boomerang) option in Darkroom Booth?

      Here is a quick video on how to set up the Animated GIF option in Darkroom Booth. New in version 3.0 is the Burst Mode Boomerang. This is done as a short video so as with all video, if you are using a DSLR you need a class 10 or higher memory card in ...
    • Adding a Video Background to Darkroom Booth

      Here is a video on how-to video as a background to a template in 3.0.840 or higher. ​
    • Trial Mode in Booth 3

      You can try out Darkroom Booth or use an unlicensed copy to design templates. On the Downloads page, click the link for the latest build to download and install Booth. When you launch the software, skip the activation and the software will go into ...
    • Edit Mode and Booth Stickers

      Edit mode allows you to add virtual Props, Doodle on the image and resize and crop the photo. To add virtual props to your print template open the template in the editor then; Click on the Add Artwork icon then in the properties window select Graphic ...