Minimum Specifications Required to Run Dot3D Pro (with supported Intel RealSense or DPI/PrimeSense 3D cameras)

Minimum Specifications Required to Run Dot3D Pro (with supported Intel RealSense or DPI/PrimeSense 3D cameras)

Minimum System Specs (All Platforms):
- At least one USB 3.0 (or higher) compatible USB port
- 1 GB of available hard drive / storage space
- Internet connection (to activate your Dot3D license)

Minimum System / OS Specs (Windows):
- Intel Pentium Gold 4415Y or comparable
     (Intel processors only)
- OpenGL 3.3 compatible Graphics
- 4 GB of RAM
- Windows 10 or later

Minimum System / OS Specs (Android):
- Quad Core CPU (not older than 2017)
- Qualcomm Snapdragon chipset
- OpenGL ES 3.1 compatible Graphics
- 2 GB of RAM
- Android 7 or later


Recommended Cables:
  1. Anker Thunderbolt 3.0 Cable 1.6 ft
  2. 3.1 Gen2 4K 10G USB C to USB C Cable 1FT
  3. USB C-to-C 22 cm - Silver
  4. USB C-to-C 22 cm - Black
  5. USB C-to-A cable included with all RealSense kits
**Please note that USB-A to USB-C adapters may not work properly for this connection. We recommend the USB C-to-C options listed above.**

    • Related Articles

    • List of Depth Cameras Supported by Dot3D

      The following cameras are fully supported for 3D scanning in Dot3D Pro, Dot3D X, or Dot3D Lite: 1. DPI-10 (complete hardware kit with built-in, DP-Calibrated Carmine 1.082 sensor) - $2500 USD      or DPI-X (smaller, mountable, but less ...
    • Which Intel® RealSense™ depth camera is recommended for use with Dot3D Scan/Pro?

      Of the current lineup of Intel® RealSense™ depth cameras (L515, D455, D415, D435, D435i), we primarily recommend the L515 and D455 for the best results when paired with Dot3D for 3D scanning purposes. While there are many factors at play here, the ...
    • Dot3D Won't Connect to my Intel RealSense Camera

      Q: Dot3D does not recognize my Intel RealSense Camera or won't connect to it or wont allow me to start scanning with my RealSense camera. How can this be fixed? A1: Windows & Android: Make sure your computer or phone/tablet has a USB-3 compatible ...
    • Android Dot3D Installation Instructions

      VIDEO TUTORIAL: www.dotproduct3d.com/androidinstall System Updates: Before installing onto your Android device, please ensure your Android OS is up to date by checking for updates from Settings. Please click here for instructions on updating your ...
    • Intel RealSense Firmware Update Procedure

      Please follow the steps below to update your Intel RealSense camera to the latest available firmware from a Windows PC. It is recommended you check for available updates regularly, especially if you are running into any performance/connection issues ...