Tutorial: Hard Targeting in Phi.3D

Tutorial: Hard Targeting in Phi.3D

    • Related Articles

    • Survey Control Targeting Tutorial (Dot3D 5.0+)

      Welcome to the Dot3D (5.0+) survey control targeting tutorial. This video will walk you through the full process of referencing known target coordinates to your Dot3D scans before optimization for the most accurate and geo-referenced results in ...
    • Tutorial: Scale Bar Targeting in Phi.3D

      Please click below for the full video tutorial on scale bar targeting in Phi.3D: https://vimeo.com/145551710 In 2019, Phi.3D was replaced by Dot3D Pro. We recommend all DotProduct users upgrade to the latest Dot3D Pro.
    • Targeting: How to Reference Survey Control Coordinates in Dot3D 5.0 & Up

      1. Obtain a minimum of 3 AprilTag target coordinates (i.e. from survey instrument, measurement, reference model, another point cloud, etc.) 2. Set up a .txt target control file in the following format: AprilTag #, x, y, z AprilTag #, x, y, z AprilTag ...
    • How to Use Targeting without Targets in Dot3D

      Targetless Targeting: How to Use Targeting without Targets in Dot3D™ Targeting is a great way to improve the accuracy and reliability of your Dot3D scan data, especially across larger scenes. Did you know that you can use targeting even if you didn't ...
    • Using AprilTags for Loop Closure in Dot3D

      Overview: AprilTags for Loop Closure provide a way for Dot3D to identify 3D points in the scene across different points in time. They do not require any additional measurement or manual input and will never decrease your optimized data quality, so ...