Recommended Phones for Use with Dot3D Pro/Scan

Recommended Phones for Use with Dot3D Pro

Please see below for a running list of phones supported for use with Dot3D for 3D scanning. Android phones require an Intel RealSense (or DPI-X/DPI-XSR) depth camera. Apple phones only support scanning via their built-in LiDAR cameras. Note that this list is not exhaustive, but does include some of the more well tested options. On any platform, always make sure you are running the latest OS version available for the device.

Please click here to review minimum specs for all platforms. On Android, a Qualcomm Snapdragon chipset is required.

Recommended Phones:
  1. iPhone Pro (12 & up) - built-in LiDAR camera, not compatible with external cameras
  4. Motorola phones meeting the minimum specs
Recommended Cables:
**Please note that USB-A to USB-C adapters may not work properly for this connection. We recommend the USB C-to-C options listed above.**


    • Related Articles

    • Recommended Tablets for Use with Dot3D Pro

      1. Microsoft Surface Pro Series 2. Microsoft Surface Go Series (DPI-10/SR compatible) 3. Samsung Galaxy Tab S Series (not LITE or FE models) 4. iPad Pro (2020 & up) - built-in LiDAR camera, not compatible with external cameras 5. Any other ...

    • Getting Started with Dot3D Pro & Dot3D Scan for Intel RealSense

      Please see below for a getting started tutorial on Dot3D Pro and Dot3D Scan software for use with Intel RealSense depth cameras: www.dotproduct3d.com/scanprodemo It is recommended that new users review this video both before and after capturing their ...

    • Which Intel® RealSense™ depth camera is recommended for use with Dot3D Scan/Pro?

      Of the current lineup of Intel® RealSense™ depth cameras (L515, D455, D415, D435, D435i), we primarily recommend the L515 and D455 for the best results when paired with Dot3D for 3D scanning purposes. While there are many factors at play here, the ...

    • List of 3D Depth Cameras Supported by Dot3D

      The following cameras are fully supported for 3D scanning in Dot3D: 1. DPI-10 (complete hardware kit with built-in, DP-Calibrated Carmine 1.082 sensor) - $2500 USD      or DPI-X (smaller, mountable, but less rugged/complete version of DPI camera kit) ...

    • Dot3D Tutorial (Dot3D Pro 4.0)

      Please click below for a full length video tutorial covering our flagship Dot3D Pro handheld 3D scanning software. This video happens to be filmed from an Android phone equipped with an Intel RealSense L515 Kit, but almost all concepts also directly ...