1. From the Main Sidebar, hover Center Visits.
2. Select Sign-In Stations.
3. Select Create New.
4. Enter a Station Name.This
is used to identify the sign-in station in the list of stations in AccuCampus.
We recommend that this be specific and unique.
5. Enter a Title. This
is what will show to the user when they approach the sign-in station. It can be
the same as the Station Name, or a different name if desired.
6. Enter Instructions. These
will display to the user as they approach the sign-in station.
7. Choose a Tracking Mode. Center Attendance is used for centers, departments, or other
entities and allows users to select services, courses, advisors, etc. based on
the settings below. Class Attendance
is used for individual courses and signs in the user based on the schedule for
8. Select Single Step Kiosk as the Sign In/Out Mode.
9. If desired,
add an Admin Passcode. This will
restrict the ability of a user with permission to change the event or quickly
enroll users if they don’t have the passcode.
10. If desired,
set the following information to display on the sign-In station screen once a
user signs-in. You can choose the length of time that the information will
Show Visitor IDs – shows the user’s card number
Show Visitor Names – shows the user’s name
Show Visitor Photos – shows the user’s photo (if
imported into AccuCampus)
11. Choose the Location where the sign-in station will
be used. If desired, Edit Settings for that location’s kiosk by clicking next to the location. A pop-up box will appear. This allows you to dictate which service, course and staff member selections are allowed. This is also where you would set staff load-balancing.
12. If desired,
add a Survey to display upon
13. If desired,
enable a Beacon as the sign-in
station. You must first create a Beacon Profile before enabling this feature.
14. There are
two options for saving the sign-in station.
Save & Install Here – saves the sign-in station and displays it
within the browser you are using once you log out of AccuCampus.
Save without Installing – saves the
sign-in station only. This allows you to create the sign-in station on one
device, but deploy it on another device.