Artillery 3D Technology Co., Ltd.

Hardware

General information

At what resolution does the Sidewinder X1 (SW-X1) print?

The SW-X1 supports layer heights between 80 microns and 320 microns (with stock 0.4mm nozzle).
Artillery recommends an ambient operating temperature from 15 °C to 32 °C (59 °F to 89 °F) for the SW-X1. However, the required ambient temperature may vary while printing with different materials.

Build plate leveling

Must the build plate be calibrated before using the printer for the first time?

Yes. Although we have done a full test of every machine before packaging, The screws may come loose during shipping, so it's strongly suggested to do a manual leveling before printing the first time, for a detailed leveling procedure, please read Build plate leveling.




    • Related Articles

    • Hardware

      General information At what resolution does the Genius print? The Genius supports layer heights between 80 microns and 320 microns (with stock 0.4mm nozzle). What are the recommended operating conditions for the Genius? Artillery recommends an ...
    • ARTILLERY LIMITED WARRANTY

      LAST DATE UPDATED: December 1, 2020 THIS LIMITED WARRANTY (“Limited Warranty”) applies to new and refurbished Artillery hardware devices (Artillery Sidewinder X1, Artillery Genius, Artillery Hornet) (collectively the “Products”) sold by ARTILLERY or ...