Artillery 3D Technology Co., Ltd.

Materials

General material information

What materials can be used with the Sidewinder X1 (SW-X1)?

The SW-X1 supports the use of PLA, ABS, PETG, TPU, TPE, and some high temperature filaments may need to change to all metal throat.

What diameter filament should be used?

1.75mm filament should be used for the SW-X1.

    • Related Articles

    • Changing materials

      Materials can be changed easily on the Genius by using the procedure from the menu. Besides changing a material you also have the option to load or unload material. Go to the menu TOOLS > CHANGE. To unload the material currently in the machine, ...
    • Changing materials

      Materials can be changed easily on the Sidewinder X1 by using the procedure from the menu. Besides changing a material you also have the option to load or unload material. Go to the menu TOOLS > CHANGE. To unload the material currently in the ...
    • Hardware

      General information At what resolution does the Genius print? The Genius supports layer heights between 80 microns and 320 microns (with stock 0.4mm nozzle). What are the recommended operating conditions for the Genius? Artillery recommends an ...
    • Hardware

      General information At what resolution does the Sidewinder X1 (SW-X1) print? The SW-X1 supports layer heights between 80 microns and 320 microns (with stock 0.4mm nozzle). What are the recommended operating conditions for the SW-X1? Artillery ...