Understanding the Current State in Mobile App

Understanding the Current State in Mobile App

Motion Status


 Trip with speed 10 kmph.

 Stop (Speed = 0) & No ignition - No Key in the icon.

 Parking (Speed = 0 for more than 5 minutes) & No ignition - No Key in the icon.

Idling (Speed = 0 for more than 5 minutes) & ignition - Key in the icon.
 
       Last state received more than a week ago. Location is not valid.

       No data from the unit.


Data Currency


Location received within 5 minutes.

 Location received more than 5 minutes ago.

Location received more than one hour ago.

Location received more than 24 hours ago.



    • Related Articles

    • Vertex Web App Motion Status

      The motion state icon in the worklist shows the status of the vehicle as follows:  Engine is off and the vehicle is not moving - Stop  Engine is on and the vehicle is not moving - Idling  Engine is on and the vehicle is moving - Run  The vehicle was ...
    • Manage the vehicle list - Web App

      The Work Area in the Monitoring Panel shows a list of vehicles that can be managed in the application. This list can be filtered using the icon shown below: When you click this icon a window pops up showing all the vehicles in your account. Here you ...
    • Why is my car battery getting drained after fixing vehicle tracker?

      The issue of the car battery draining out is very common in cars that are parked for a few days, especially with an active GPS system. Typically, the GPS device draws around 50 milliamps for working under normal conditions where the GSM signals are ...
    • Odometer reading

      The odometer reading in Vertex IFMS is calculated in two distinct ways: 1. OBD based If the vehicle is fitted with an OBD compliant vehicle tracker, the reading from the vehicle odometer as available in the dashboard of the vehicle can be ...