Functions requiring Ignition Input Wire are not working.

Functions requiring Ignition Input Wire are not working.

To troubleshoot this issue, please:
  1. Ensure the orange ignition input wire is connected to ignition circuits for additional equipment. This signal wire has a maximum of 5 amps. so it must be used only as a signal wire.
  2. With the auxiliary functions turned on, check for voltage using a multi-meter at the ignition input on orange. The voltage should read the battery voltage. Check with the auxiliary equipment manufacturer if the equipment still does not function.
  3. Ensure that the 'Ignition Signal Control' block, in the Service Tool, is configured properly.