GRIP Idle Management Inc.
            Knowledge Base GRIP Idle Management Inc. Hardware

            The Hood Pin icon is displayed on the screen.

            If the Hood Pin icon is displayed on the screen, please:
            1. Verify that the hood is down and the LED light is illuminated on the hood pin. 
            2. Verify the position of the magnet. If the LED is not illuminated on the hood pin, adjust the height of the hood pin to ensure the magnet and pin is making contact. The hood pin and magnet should be within 3/8" apart.
            3. Check the harness to ensure connections are made at both the hood pin and the main wiring harness.

            Updated: 09 Jan 2019 01:20 AM
            Helpful?  
            Help us to make this article better
            0 0