Notifications
A red LED is flashing on the bottom right of the GRIP screen.
If the red light is flashing, it is indicating a low voltage condition. Check condition of batteries and charge if necessary.
A red LED light is illuminated on the bottom right of the GRIP screen.
If a red LED light is illuminated on the bottom right of the GRIP screen, please: Cycle key, if the light remains on, the controller may need to be reset. This can be done by pulling out and reinserting the 10-amp mini fuse located on the main power ...
A Hood Pin icon is displayed on the GRIP screen.
If a hood pin icon is displayed on the GRIP screen, please: Make sure the hood is closed and latched. Once this is verified, the icon should not be present on the screen. If the icon is still present, the vehicle can be started and run as normal, ...
A Snowflake icon is flashing on the GRIP screen.
If a snowflake icon is flashing on the GRIP screen, please: Confirm the correct temperature settings are on the screen, using the up or down scroll buttons; that the vehicle’s air conditioning settings are correct; that the vehicle’s climate control ...
The Communications icon is displayed on the screen.
If the Communications icon is displayed on the screen, please check all connections and: Ensure the connection at the OBD connector is properly secured to the OBD plug. Ensure the connection from the installed OBD connector to the main GRIP Harness.