2013-2018 Dodge Ram Factory 8.4" Bezel 4 speed HVAC Conversion

2013-2018 Dodge Ram Factory 8.4" Bezel 4 speed HVAC Conversion

Below is information for the 4 Speed HVAC Conversion.
If you currently have a 7sp fan prior to the upgrade, click here. 


Please click here for the product page. 




Common Problems and Troubleshooting Steps (4 speed to 7 speed) 


- No power to the 8.4 bezel (no lights, etc.): 


Check the conversion harness & 8 pin plug for proper connection/damaged wires


.- Fan doesn’t work: 

Please click here to show the conversion harness and blower harness connection. The blue Molex plug should be connected to conversion harness (page 10)


-Fan is erratic, resistor issues, possible bad connection from harness to resistor:

Please click here to view a video showing a possible resolution to this issue. 


- No power to the radio afterwards

 Check the fuses in the PDC. If those are ok, check the secondary/inline radio fuse near the brake booster:



Attached is the install guide for a 4 speed to 7 speed conversion.





    • Related Articles

    • 2013-2018 Dodge Ram Factory 8.4" Bezel 7 speed HVAC Conversion

      Product page can be found by clicking on this link The video below is for vehicles that currently have a 7 speed HVAC system prior to the upgrade.  If you have a 4 speed and you're converting to a 7 speed click here  

    • AC Climate control visual bug on Ram 1500

      Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...

    • UAM Bezel

      When buy the UAM upgrade for your vehicle, please keep in mind what kind of vehicle you have.  There will be a change in the bezel depending on whether you have a gas vehicle or a diesel vehicle.  Diesel = The ECS button will be located next to the ...

    • Speed Limits no longer available in EVIC cluster, after IO6 upgrade

      When upgrading your HMI to factory navigation, you will lose the feature of having Speed Limits in your EVIC cluster, as that is only retained with vehicles that had native navigation already.

    • 2015+ Grand Cherokee HVAC Climate Control Swap

      Button Swap Instruction Video: Do you own a 2015+ Jeep Grand Cherokee with an existing 8.4-inch Uconnect radio? Did you know you can easily upgrade to the all-new 8.4-inch "UAV" Uconnect Infotainment system with the high resolution HD disassociated ...