2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio
After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that means there's an amp incompaitbility and this upgrade will not work for the vehicle. As this upgrade is only compatible with non-JBL audio systems.
Related Articles
2016-2020 Toyota Tacoma Entune 3.0 radio won't power on after installation
After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to move it from the right to left left, behind the unit.
Toyota radio resets
On Denso-ten unit: Hold Apps or Info then flip headlights switch on/off 4 times, this will take you to diagnostics menu. Hold INIT and MEMORY CLR to delete data, if you went through INFO it will be in the the first option. Panasonic Unit: Hold Menu ...
Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers
If your new Entune 3.0 radio doesn't allow you to press on the time and set the clock or miles or kilometers don't track or allow change, that's related to the GPS connection. Make sure your GPS antenna is fully connected, that the antenna is placed ...
UNABLE TO GET THE ENTUNE APP SUITE/ VIN# DOESN'T WORK
1. Download the two Apps on your phone Entune Entune App Suite 2. Register with your VIN# MAKE SURE THAT YOUR VEHICLE IS COMPLETELY POWERED OFF WHILE REGISTERING. If your vehicle’s original factory radio did not have the “Apps” button you will need ...
Installing Toyota Amplifier
TOYOTA AMP INSTALL GUIDE The plug with the audio video wiring is optional if you are adding rear backup camera or rear seat entertainment. Otherwise you may tape this up somewhere. The two female connectors are for your factory radio plugs that ...