2016-2020 Toyota Tacoma Entune 3.0 radio won't power on after installation

After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; 

You have to move it from the right to left left, behind the unit.

• Related Articles

• 2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio

  After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that means there's an amp incompaitbility and this upgrade will not ...

• Toyota radio resets

  On Denso-ten unit: Hold Apps or Info then flip headlights switch on/off 4 times, this will take you to diagnostics menu. Hold INIT and MEMORY CLR to delete data, if you went through INFO it will be in the the first option. Panasonic Unit: Hold Menu ...

• RADIO DOES NOT POWER ON AFTER I INSTALL MY UPGRADE KIT

  If you installed your upgrade kit and notice that your radio no longer turns on please check the followings:  1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...

• Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers

  If your new Entune 3.0 radio doesn't allow you to press on the time and set the clock or miles or kilometers don't track or allow change, that's related to the GPS connection. Make sure your GPS antenna is fully connected, that the antenna is placed ...

• Toyota Antenna Installation

  If you're having issues with antenna installation, specifically fit, please see below:  Video Explanation/Guide: Pictured Instructions:  This is what the antenna looks like if purchased by Infotainment.com These two radios are the most popular Toyota ...