Customizing Lower Icons on the radio screen

• Related Articles

• UAQ UAS UAG Acclimation Period upon Installation

  Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...

• Well everything seems to be working fine, I just don't have some icons on the bottom of the screen UAS in Jeep Cherokee

  Deeper Question:  Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice having the icon and also looked better having the ...

• Can't navigate multiple camera inputs with UAQ/UAS upgrade

  If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...

• UConnect Requiring MDN for UConnect Access Transfer on 8.4 UA Radio Upgrade

  While UConnect almost never wants to transfer over UConnect Access to a newly installed radio, you'll sometimes talk to a Tier II rep that will try to accommodate your request. They will ask for an MDN number that can only be found in the settings of ...

• UAQ / UAS requesting update after install

  After installing your Infotainment UAQ or UAS upgrade, if you had an 8 inch screened-unit in the vehicle before, over the air updates will still be retained. Please proceed forward once met with this message: