Can't control climate on 8.4 Jeep Wrangler screen upgrade
After installing an 8.4 inch screen upgrade, if you've noticed that you can control your climate on the hard knobs but not the touchscreen, it's because your stock climate control is analog. To fix this you'll need to upgrade to a
digital climate control kit that will enable you to control climate on the touchscreen as well.
Related Articles
UAQ UAS UAG Acclimation Period upon Installation
Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...
Can't navigate multiple camera inputs with UAQ/UAS upgrade
If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...
UAQ / UAS requesting update after install
After installing your Infotainment UAQ or UAS upgrade, if you had an 8 inch screened-unit in the vehicle before, over the air updates will still be retained. Please proceed forward once met with this message:
Well everything seems to be working fine, I just don't have some icons on the bottom of the screen UAS in Jeep Cherokee
Deeper Question: Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice having the icon and also looked better having the ...
Climate control icon not showing in my Sync 3 upgrade for Ford F-150 or SuperDuty
The climate screen doesn't show in this upgrade due to these vehicles not having automatic climate control, but manual.