Can't navigate multiple camera inputs with UAQ/UAS upgrade
If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when upgrading to an Infotainment UAQ and/or UAS upgrade.
Related Articles
UAQ / UAS requesting update after install
After installing your Infotainment UAQ or UAS upgrade, if you had an 8 inch screened-unit in the vehicle before, over the air updates will still be retained. Please proceed forward once met with this message:
UAQ UAS UAG Acclimation Period upon Installation
Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...
RADIO DOES NOT POWER ON AFTER I INSTALL MY UPGRADE KIT
If you installed your upgrade kit and notice that your radio no longer turns on please check the followings: 1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...
IOU Upgrade Backup Camera TSB
On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...
Well everything seems to be working fine, I just don't have some icons on the bottom of the screen UAS in Jeep Cherokee
Deeper Question: Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice having the icon and also looked better having the ...