Related Articles
OBD Genie Troubleshooting Guide
OBD Genie Troubleshooting Guide Following this simple instructions is the first steps to getting you back on the road with all the new modifications. My OBDGenie is not doing anything. No lights appear when plugged in, I can't tell if it's getting ...
Cargo Camera Not Showing Up On Screen
If you're having issues with your VP3 (RA3) VP4 (RA4) Infotainment system not showing the Cargo camera, or you're not sure how to access it, please continue below: Your unit may appear to visually look differently than the one below. But generally, ...
Cargo Camera - Grid Lines
To turn off Grid Lines for a RAM Cargo Camera: You will need to snip the green wire, this might be labeled "Parking Lines". If you are still seeing the grid lines (parking lines) after snipping the green wire or if the green wire is already snipped, ...
IOB Genie gave green light but screen is black
This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black. After turning on the vehicle's engine, letting it run 1 minute, ...
Missing Travel Link Icon
If you've installed the UAQ radio and you are not seeing the Travel Link icon it will not appear unless your vehicle originally came with that function because the code will not be set in your BCM. The previous radio such as an RA4 (VP4) would show ...