Genie not programming for IOU upgrade
The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not showing as an option in your display, and you have a 2019-year GM vehicle, or a Chevy Colorado or GMC Canyon of any year, your firmware may be preventing programming.
Go into 'Settings', then 'About' and find the version.
- If it's vA03 or lower, you're okay. Restart your vehicle, turn it back to accessory, let it sit one minute then put in your OBD Genie.
- If it's vA04 or higher, your Genie, that has now seen your VIN, will have be returned to Infotainment, where that information can be used to make correct the issue and the fix will be sent back as a Genie label "*G-NAV*." Reach out to Infotainment Technical Support, 407-977-5100 option 1, with your 5-digit Infotainment Order # to set up this Genie Exchange.
Related Articles
SD Card error fix with IOU upgrade
With the GMC IOU upgrade, after install your SD card, if you get a Map Card Read Error, go to "Settings" the click "Return to Factory Setting." This will cause the map card to read.
OBD Genie not programming an older vehicle
After turning on your Chrysler-based vehicle, letting it sit for 1 minute, then installing your OBD Genie into the OBD II port of your vehicle, if you don't get a solid green light indicating programming, have done a CANBUS reset, and still don't get ...
Daytime Running Lights Genie (DRL)
The Daytime Running Lights genie does not provide the option to toggle on and off from the radio. The DRL will be disabled when the vehicle is completely shut off. If you would like to remove the DRL option it requires a "Restore to Factory Default" ...
UAV/UAX windshield wipers won't stop after installing unit/Genie
Please have your vehicle completely turned off, or battery terminals removed, during the installation process of your retrofit upgrade. If you install this with your vehicle on or in accessory and try to use the Genie, even if it gives you a green ...
IOU Upgrade Backup Camera TSB
On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...