Hardmount C-SATF-DT Skarkfin Antennas on Heavy Duty Rams
The C-SATF-DT antenna will not fit on Heavy Duty Rams. In this case, the existing sharkfin antenna can stay and only need U-INTC2K
Related Articles
2019-2022 Ram 1500 & Heavy Duty Parasitic Battery Drain
The RAM trucks that are installing any upgrade that will be using the connector to the back of the Cigar Lighter to provide the 12V power and ground to the product "EZDC" harness may need to change the fuse position. Depending on what circuit the ...
How to install 2019+ FCA Security Gateway Module Bypass in Heavy Duty Rams
The bypass must be installed behind the cluster. Below is a video that shows how to uninstall your cluster, install the bypass and program your Genie: https://www.youtube.com/watch?time_continue=2279&v=MhAqc-7AD2k&feature=emb_logo
Direction, and Temperature not at the top of the radio!
If you are looking at pictures of an RA4/UAQ screen you may notice some of them show direction, and temperature at the top of the screen. This was something that was actually removed with an update, and will no longer be displayed there. The reason ...
Enzo C-INT4CK Instructions
FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...
AC Climate control visual bug on Ram 1500
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...