How to install 2019+ FCA Security Gateway Module Bypass in Heavy Duty Rams
The bypass must be installed behind the cluster. Below is a video that shows how to uninstall your cluster, install the bypass and program your Genie:
Related Articles
Security Bypass Module location & instructions
If you have a 2018+ Chrysler, Dodge, Ram or Jeep Vehicle, you will need to temporarily install a Security Bypass Module: https://www.infotainment.com/products/fca-security-gateway-module-bypass The security bypass module is plugged into the ...
Hardmount C-SATF-DT Skarkfin Antennas on Heavy Duty Rams
The C-SATF-DT antenna will not fit on Heavy Duty Rams. In this case, the existing sharkfin antenna can stay and only need U-INTC2K
AC Climate control visual bug on Ram 1500
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...
2018 + Vehicles with a Security Gateway
The below pictures are from a 2018 Ram 1500, but the Security Gateway module will look the same on all vehicles just different locations 2018 and newer FCA Vehicles come with an OBDII "firewall" (SGW) that blocks any aftermarket connections to the ...
OBD Genie Troubleshooting Guide
OBD Genie Troubleshooting Guide Following this simple instructions is the first steps to getting you back on the road with all the new modifications. My OBDGenie is not doing anything. No lights appear when plugged in, I can't tell if it's getting ...