Infotainment.com

IOU ERROR: "General inaccuracy, please restart Nav."

If you have the IOU unit, and you are seeing the "General inaccuracy, please restart Nav."  on the screen after the installation here's what you could do to resolve it: 

You can go into the settings, click on restore setting and there will be three options for you. 

Please restore the setting on all three options that you see on the screen. 

IF this doesn't work, uninstall and reinstall the unit, wait 5-10 minutes and then do these resets again.


    • Related Articles

    • SD Card error fix with IOU upgrade

      With the GMC IOU upgrade, after install your SD card, if you get a Map Card Read Error, go to "Settings" the click "Return to Factory Setting." This will cause the map card to read.
    • Sources always revert back to AM/FM after vehicle restart, with Sync 3

      If your phone was connected to your USB port when your vehicle was last in use, and you restart your vehicle without the phone plugged up, your Sync 3 will revert to AM/FM sources. This is a normal feature of the Sync 3, and your previously used ...
    • 2019 GM IOU Navigation Splash Screen

      2019 GM IOU NAVIGATION UPGRADE AFTER YOU INSTALL After you install the IOU Navigation Radio. Shut the car off and get out of the vehicle and close the doors. Wait 2 minutes, for the vehicle to sleep. Once you have waited the two minutes go back into ...
    • IOU has blue screen and Cadillac splash after install

      This is completely normal, as the screen will be blue, count down then give a Cadillac splash screen upon install install. This will not correct itself until the vehicle is restarted.
    • Genie not programming for IOU upgrade

      The vehicle must ALWAYS be in Accessory Mode for one minute, before placing your OBD Genie into the OBDII port, as the Genie can't be read by your vehicle when it's running. However, if the Genie programming is unsuccessful, with navigation not ...