Sources always revert back to AM/FM after vehicle restart, with Sync 3
If your phone was connected to your USB port when your vehicle was last in use, and you restart your vehicle without the phone plugged up, your Sync 3 will revert to AM/FM sources. This is a normal feature of the Sync 3, and your previously used sources, such as Sirius XM, will resume on vehicle start-up, if the your phone is already plugged into theport before hand.
Related Articles
Carplay back to Sync 3 Interface.
To switch from Carplay to the Sync 3 Interface, you hit the "apps" button the bottom right corner when Carplay is active. Then hit the Ford Sync App that is listed under the apps listing. That will take you back to the Ford Sync 3 interface.
Sync 3 upgrade gives Navigation Fault
This issue arrives if the Sync 3 upgrade doesn't have our infotainment GPS antenna plugged in upon start-up: To resolve this, always plug in the GPS antenna we supplied you BEFORE turning on the unit/vehicle.
DIFFERENT VEHICLE LOGO AND MISSING ICONS
If you just installed your infotainment system and is getting a different splash logo. For example; your vehicle is a Jeep Wrangler but the radio shows Ram, that is completely normal and for all FCA vehicles. The radio will eventually adjust itself, ...
RER / RHR randomly switching AM / FM stations
If your RER or RHR radio is randomly scrolling through AM or FM stations, your SCAN icon is likely pressed. Simply press it again to fix this issue.
Ford Explorer Steering wheel Mode Button not working after 4" to 4" Sync 3 Upgrade
After installing the 8.4" Sync 3 upgrade radio, you may notice that your Mode button on your steering wheel no longer functions, this is due to the radio screen size being tied to the steering wheel configuration. There's a 4-inch Configuration: And ...