UAM Bezel

UAM Bezel

When buy the UAM upgrade for your vehicle, please keep in mind what kind of vehicle you have. 

There will be a change in the bezel depending on whether you have a gas vehicle or a diesel vehicle. 

Diesel = The ECS button will be located next to the hazard button on the bezel. (As you see in our advertisement) 

Gas = No ECS button because you will have it located In lower switch panel. 

    • Related Articles

    • AC Climate control visual bug on Ram 1500

      Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...

    • 2013-2018 Dodge Ram Factory 8.4" Bezel 7 speed HVAC Conversion

      Product page can be found by clicking on this link The video below is for vehicles that currently have a 7 speed HVAC system prior to the upgrade.  If you have a 4 speed and you're converting to a 7 speed click here  

    • Volume Bezel Wiring Swap

      Here is a video showing how to swap the wiring from one volume bezel over to the new one. https://workdrive.zohoexternal.com/file/imu0a72120d7491ac4198a711a39124d3db69

    • "XM not available" message after installing RA2 upgrade in Ram truck

      This issue seems to be more prominent in 2013 & 2014-year vehicles. If you've checked check your radio's XM port pin, it's straight, and the XM antenna fit's perfectly, with this issue not going away no matter where the antenna head is placed, the ...

    • 2013-2018 Dodge Ram Factory 8.4" Bezel 4 speed HVAC Conversion

      Below is information for the 4 Speed HVAC Conversion. If you currently have a 7sp fan prior to the upgrade, click here.  Please click here for the product page.  Common Problems and Troubleshooting Steps (4 speed to 7 speed)  - No power to the 8.4 ...