UAQ / UAS requesting update after install
After installing your Infotainment UAQ or UAS upgrade, if you had an 8 inch screened-unit in the vehicle before, over the air updates will still be retained. Please proceed forward once met with this message:
Related Articles
UAQ UAS UAG Acclimation Period upon Installation
Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...
Can't navigate multiple camera inputs with UAQ/UAS upgrade
If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...
15 Charger/Challenger USB hub Install/removal
These are instructions provided by a customer for an easier install/removal of the USB hub than the removing the entire console. USB Hub Removal/Install For a Charger, the swap of the hub is MUCH easier. While the same may apply to the Challenger, I ...
UConnect Requiring MDN for UConnect Access Transfer on 8.4 UA Radio Upgrade
While UConnect almost never wants to transfer over UConnect Access to a newly installed radio, you'll sometimes talk to a Tier II rep that will try to accommodate your request. They will ask for an MDN number that can only be found in the settings of ...
Well everything seems to be working fine, I just don't have some icons on the bottom of the screen UAS in Jeep Cherokee
Deeper Question: Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice having the icon and also looked better having the ...