MyLink / Intellilink
Mylink not working
After the customer installs the new module they need to call XM to update their subscriptions and request that MyLink be added. After the customer gets a signal refresh sent to their vehicle. They need to wait 30 minutes and then disconnect the ...
Corvette - Lost Drive Modes
If you upgrade to an IO6, your cluster display will no longer change automatically when you switch Drive Modes. You can still use the different cluster displays, but they must be changed within the cluster settings using your steering wheel controls.
2015-17 GMC Yukon/Tahoe ACM Location/Installation
If you elected to have Apple Carplay on your radio upgrade than you will need to replace your ACM module in the vehicle. The below link will bring you to a video that will show you how to remove the dash around the radio, and get access to the ACM to ...
Outside temperature is incorrect
My Outside temperature stays at 32 degrees! *************************************************************************************************************************************************************************** If you are seeing your outside ...
Sirius sent a signal and the Travel Link and/or Traffic and Weather is not functioning
The issue is that the vehicle's ACM, which contains the Sirius tuner, needs upgrading. We carry the upgraded ACM module that you will need: https://www.infotainment.com/products/gm-u2k-siriusxm-satellite-radio-upgrade
"Calibrate Device" Error
If you've installed your HMI Module, and are getting the message "Calibrate Device" on the screen with Navigation, then unfortunately the programming was deleted. This can happen if your vehicle was taken to a dealership for help with the install, ...
io6 Install Instructions for 2015 Colorado/Canyon
Below you can find some additional information on an io6 upgrade for a 2015 Colorado/Canyon. You can see the store page by clicking here. The picture above shows the location of where the HMI module is located. The picture below shows a 3D model of ...