This is completely normal, as the screen will be blue, count down then give a Cadillac splash screen upon install install. This will not correct itself until the vehicle is restarted.
After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to move it from the right to left left, behind the unit.
These are instructions provided by a customer for an easier install/removal of the USB hub than the removing the entire console. USB Hub Removal/Install For a Charger, the swap of the hub is MUCH easier. While the same may apply to the Challenger, I ...
If you cannot locate an install video for your exact vehicle you can use this guide below. There are YouTube video's other users have posted to show how to remove the dash bezel you may find. The installation is a simple process though. If you ...
The bypass must be installed behind the cluster. Below is a video that shows how to uninstall your cluster, install the bypass and program your Genie: https://www.youtube.com/watch?time_continue=2279&v=MhAqc-7AD2k&feature=emb_logo