GM - Cameras - "No camera available"
The vehicle may not be pre-wired for a backup camera. We will need to exchange the unit for one with the wiring loom. They will need to run the camera wiring behind the glove box to the HMI module. Simply remove the glove compartment and locate the module in this picture:
Locate power behind the cigarette lighter outlet. Tap into the red wire and ground black wire to chassis.
Related Articles
"Service Rearview camera" error after installing GM back up camera
Once confirming you're pre-wired in a 15 model vehicle or installing the camera in a 16 year vehicle or newer, you'll typically want to install the camera wiring into the dummy plug. However, those who have a locking tailgate handle be sure to swap ...Can't navigate multiple camera inputs with UAQ/UAS upgrade
If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...GM Parrot Bluetooth Installation
We no longer carry this kit but come check us out for all your 2007-2019 GM factory radio upgrades including GPS navigation, XM satellite radio, backup cameras & more. www.infotainment.comVoice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR
After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...IOU Upgrade Backup Camera TSB
On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...