2018 + Vechicles With ESS, or Engine Start Stop

2018 + Vechicles With ESS, or Engine Start Stop

If you have an 18+, or any vehicle with engine start stop feature you will most likely have a second battery in the vehicle. If you do have a second battery please do not perform a CAN-BUS reset. You are best off just leaving the negative on the battery disconnected as you can pop you're fuse relay from the second battery still being connected.

This has happened mainly on Jeeps with the ESS feature. If you are getting odd things after trying a CAN-BUS you may have blown the fuse relay IF you have ESS. I will leave a part number, and link to a video explaining this for a jeep wrangler.

Genuine OE Mopar Fuse-Z Case: 68368853AA


    • Related Articles

    • The elements that will prevent remote start from working

      Ensure that your vehicle is not doing any of the following in order to allow the remote start upgrade to work: -If the engine stalls or RPM exceeds 2500 -Any engine warning lamps come on -The hood is opened -The hazard switch is pressed -The ...

    • 2019 Pacifica ESS Installation

      You can simply remove the instrument panel with a pry tool as that is held on by retaining clips. You will be connecting to the plug where all your button controls are as this connection is keyed You can follow the installation for more information ...

    • "Key Not Detected" message in cluster and can't start vehicle in 2015+ Ford Mustang, after installing Sync 3 upgrade

      All Mustangs 2015 year or newer are push to starts. The main antenna for the push to start is located in the center console. You'll run into this symptom if you unplug that antenna and don't return it before finishing installation.

    • UAV/UAX windshield wipers won't stop after installing unit/Genie

      Please have your vehicle completely turned off, or battery terminals removed, during the installation process of your retrofit upgrade. If you install this with your vehicle on or in accessory and try to use the Genie, even if it gives you a green ...

    • "Radio Locked Please Start Vehicle"

      If you are receiving this message, then you have either a Chrysler 200 or Jeep Cherokee. These two vehicles use a Fiat based computer system and will on occasion need to have the vehicle programmed or "flashed" for the option code of the unit you ...