Denzo Additional Step For Voice Commands

Denzo Additional Step For Voice Commands

Radio is not able to hear my voice commands

*********************************************************************************************************************************************************************

Some navigation Units Can Require an extra step to get the voice commands working properly.


VSS HARNESS
The above picture is what your brown VSS harness with the extra wiring will look like. The additional wires are the purple, and brown wires located in Pins #8, and #16.



RADIO HARNESS
The above picture is the connection you will find on the back of your actual radio towards the passenger side. The wires you will be using are located in Pin #2, and #9. The wires are normally Black in #2, and white with a black stripe in #9, but the colors can change depending on the vehicle.

INSTALLATION

You will be splicing the Purple wire on the VSS harness located in Pin #8 into the Black Wire on the Radio connection located in pin #2.

The Brown wire on the VSS harness in pin #16 will be spliced into the wire located at pin #9 on the Black connection, and will usually be white with a black strip.

Please keep in mind the color connection on the actual radio harness may change depending on vehicle, so the easiest way to tell will be to go by the pin location

    • Related Articles

    • Denzo shows splash screen, then blue screen with clock

      When turning on the vehicle, if your Denzo headunit give you the GMC splash screen, then gives you a blue screen with just the clock on it, no allowing you to navigate further, try the below steps in order. Moving to the next step, if the last didn't ...

    • 2019 GM IOU Navigation Splash Screen

      2019 GM IOU NAVIGATION UPGRADE AFTER YOU INSTALL After you install the IOU Navigation Radio. Shut the car off and get out of the vehicle and close the doors. Wait 2 minutes, for the vehicle to sleep. Once you have waited the two minutes go back into ...

    • When screen experiences imaging issues other than back up camera in Chevy vehicles

      In Chevy vehicles, your HMI (Human Machine Interface) controls your visual feedback. Meaning if you experience an issue where the screen is having imaging issues only during certain functions, it may be the HMI, however, if the back up camera has a ...

    • Voice Recognition Not Available / UConnect not available error with Handsfree microphone on RER or RHR

      After installing your UConnect Handsfree Microphone into your RER or RHR headunit, and trying to set up voice recognition, if you receive and error stating "Voice recognition not available. UConnect not available," do the below following steps to fix ...

    • GM Wireless Charger NOT WORKING

      If your  genuine GM wireless mobile phone charger it's not working please follow the steps below: 1. Ensure the phone is properly placed. The bottom of the phone should be on the pad. It is perfectly normal for the process to take up to 10 seconds ...