Ford Fusion & Edge Install Procedure to Retain Climate Controls
Please click here to view the product page
Install this harness IF after you install the A/C system temps are not working correctly. You will insert the pins into the harness at the FCIM connector 2402B. It is the plug right next to the one that this harness fits into. The back of the bezel will be labeled 2402a and 2402b. The pins are easy to insert you just have to slide the pin lock forward and insert the new pins then push the lock back into position.
Video link https://www.youtube.com/watch?v=z17pTitTfOo
Related Articles
Ford Fusion/Edge--Climate Controls/Heat/Air Not Working Properly
Please see this procedure: https://www.youtube.com/watch?v=z17pTitTfOo&feature=youtu.beMy Climate Controls Are Not Working (Fusion/Edge)
Please see the video guide to resolve this issue by clicking here.Climate control icon not showing in my Sync 3 upgrade for Ford F-150 or SuperDuty
The climate screen doesn't show in this upgrade due to these vehicles not having automatic climate control, but manual.2019 Heavy Duty UAV or UAX Upgrade Climate issue
Since last year we've had an issue where a 2019+ Ram truck customer (who has installed either a UAV or UAX upgrade) increases or decreases their cabin temperature around 70-74 degrees the vehicle either goes full heat or full cold. This happens ...Can't Adjust Climate Controls On Screen
If you are using the Infotainment Radio Bezel, you will not be able to adjust your climate controls using your touchscreen. This is only a feature that is compatible with the Factory RAM Bezel.