heated and cooled seats and steering wheel controls not on screen
if you upgraded from a 8" screen sync 2 radio to a sync 3 navi and had heated seats and steering wheel and cooled seats controls on the screen previously and now they are not there please contact support. In some rare cases we have had some modules kick out the programming for the hvac controls. We will send you another module to correct this problem.
Related Articles
Enzo C-INT4CK Instructions
FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...
No Heated/Cooled Seats/Steering Wheel
Please see this statement from the product page: If your vehicle is a 2013-2014 and currently features heated seats, ventilated seats, and/or heated steering wheel you will need an extra module to retain those features. See our 4C Retrofit Interface ...
Ford Explorer Steering wheel Mode Button not working after 4" to 4" Sync 3 Upgrade
After installing the 8.4" Sync 3 upgrade radio, you may notice that your Mode button on your steering wheel no longer functions, this is due to the radio screen size being tied to the steering wheel configuration. There's a 4-inch Configuration: And ...
18 + Ford Expedition bezel heated seats/rear controls feature
This is totally normal. When you upgrade to the 18+ Expedition you will receive this bezel with heated seats, and heated steering wheel functions even if they don't have this option in their vehicle. Unfortunately for 2018 they do not offer a bezel ...
My steering wheel controller is not working with the new system.
In the Brick Kit should be a new steering control module. Make sure that you replace your existing steering wheel controller with the one provided. If it is still not working, then try using your original controller. We’ve found that with some ...