How to Retain Sport Mode

How to Retain Sport Mode

      To retain Sport Mode when installing an 8.4" radio, enable Sport Mode on your old radio with your engine running. You should see the icon on your vehicle's cluster. With your engine still running and Sport Mode enabled, uninstall your original radio and install your new radio. Once you enter your theft code or reach the main radio screen, this feature should be ready for use at any time.

    • Related Articles

    • Dealer Mode

      Method 1: Hold down the bottom corners of the touch screen for another way to enter dealer mode.  Method 2: STEP 1: • Put the system into ‘Dealer Mode’ • Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for ...

    • Ford Cluster issues and Troubleshooting

      Ford clusters are programmed by the VIN so, if; Navigation doesn't show up in a cluster: the vehicle may not have had a factory radio with native Nav. The cluster isn't provisioned for the vehicle's steering wheel: check to see if the customer's ...

    • Ford Explorer Steering wheel Mode Button not working after 4" to 4" Sync 3 Upgrade

      After installing the 8.4" Sync 3 upgrade radio, you may notice that your Mode button on your steering wheel no longer functions, this is due to the radio screen size being tied to the steering wheel configuration. There's a 4-inch Configuration: And ...

    • Ford Fusion & Edge Install Procedure to Retain Climate Controls

      Please click here to view the product page Install this harness IF after you install the A/C system temps are not working correctly.  You will insert the pins into the harness at the FCIM connector 2402B. It is the plug right next to the one that ...

    • Day/Night Mode Issues When Viewing Maps

      If you're having issues with your navigation unit showing just 'Day mode' or just 'Night mode' please follow these steps:  1. Try to adjust your dimmer in your vehicles dash. This is connected to your navigation unit and may cause the unit to assume ...