Installing Toyota Amplifier

Installing Toyota Amplifier

TOYOTA AMP INSTALL GUIDE



The plug with the audio video wiring is optional if you are adding rear backup camera or rear seat entertainment.  Otherwise you may tape this up somewhere.  


The two female connectors are for your factory radio plugs that you removed to add amp harness

    • Related Articles

    • Find out what amplifier a Nissan Altima customer has

      I did get your VIN, but I will still need some information about the type of radio you have factory installed, including the type of audio amplifier you currently have installed (Bose or NON-Bose). We need this information in order for us to know ...
    • 2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio

      After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that means there's an amp incompaitbility and this upgrade will not ...
    • Toyota radio resets

      On Denso-ten unit: Hold Apps or Info then flip headlights switch on/off 4 times, this will take you to diagnostics menu. Hold INIT and MEMORY CLR to delete data, if you went through INFO it will be in the the first option. Panasonic Unit: Hold Menu ...
    • Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers

      If your new Entune 3.0 radio doesn't allow you to press on the time and set the clock or miles or kilometers don't track or allow change, that's related to the GPS connection. Make sure your GPS antenna is fully connected, that the antenna is placed ...
    • Toyota Antenna Installation

      If you're having issues with antenna installation, specifically fit, please see below:  Video Explanation/Guide: Pictured Instructions:  This is what the antenna looks like if purchased by Infotainment.com These two radios are the most popular Toyota ...