Sync 1 With separate screen Camera installation

The interface will plug into the back of the ACM, or CD player in this case, and NOT the screen.

This is where you plug the interface in, and you will just connect your factory plug into the female end of the connection

• Related Articles

• IOU Upgrade Backup Camera TSB

  On some model Silverado trucks the backup camera mounting location needs to be modified to accept the new camera included in the upgrade. If attempting to install the new camera into the tailgate handle, and you run into an issue where the camera ...

• Sync 4 Screen is Glitchy / Back-up Camera Does not appear in Reverse

  Problem: Customer's Sync 4 display screen is glitchy or the backup camera does not appear when in reverse. Possible Resolution: Disconnect the supplied harness and reconnect to the factory plugs. Ensure the yellow RCAs are securely connected. Test ...

• NO CAMERA IMAGE ON THE SCREEN

  There are only 3 things that can affect the camera not working.   1. POWER & GROUND- Power and ground as mentioned earlier is recommended to be plugged into a 12-volt accessory outlet for example the cigarette port. Please check the connection on ...

• 2013-2014 Ford F-150 APIM module location (Ford Sync 4 to 8 upgrades)

  The SYNC module is located behind the screen but at the very top, above the HVAC module.

• When screen experiences imaging issues other than back up camera in Chevy vehicles

  In Chevy vehicles, your HMI (Human Machine Interface) controls your visual feedback. Meaning if you experience an issue where the screen is having imaging issues only during certain functions, it may be the HMI, however, if the back up camera has a ...