Toyota Antenna Installation
If you're having issues with antenna installation, specifically fit, please see below:
Video Explanation/Guide:
Pictured Instructions:
This is what the antenna looks like if purchased by Infotainment.com
These two radios are the most popular Toyota Entune radios available,
but the antenna fits into the slot as pointed to below.
This is the INCORRECT installation. [Below] You can currently see the white on the connector.
This is the correct installation.[Below] The white portion on the connector is no longer visible.
Removal:
We will not be held liable for any damage done to the connector. This connector as pictured is used and worn for testing.
If you purchased an antenna from Infotainment.com, your antenna will be in new condition.
Using a pair of pliers, have one end on the clip, and the other near the bottom of the connector and try not to pinch the cable.
With consistent, and firm pressure pull the pliers up, while using your thumb and index finger on your other hand to remove the connector from it's slot.
If you're still having issues, or believe the antenna you have is faulty, please reach out to the support department directly to set up an exchange.
Related Articles
2016-2020 Toyota Tacoma Entune 3.0 radio won't power on after installation
After installation of your Entune radio, you may run into a situation where your radio won't power on. The reason being where one of the harnesses is hooked up; You have to move it from the right to left left, behind the unit.Toyota Tacoma Entune 3.0 won't set clock or tracking miles/kilometers
If your new Entune 3.0 radio doesn't allow you to press on the time and set the clock or miles or kilometers don't track or allow change, that's related to the GPS connection. Make sure your GPS antenna is fully connected, that the antenna is placed ...Toyota radio resets
On Denso-ten unit: Hold Apps or Info then flip headlights switch on/off 4 times, this will take you to diagnostics menu. Hold INIT and MEMORY CLR to delete data, if you went through INFO it will be in the the first option. Panasonic Unit: Hold Menu ...Installing Toyota Amplifier
TOYOTA AMP INSTALL GUIDE The plug with the audio video wiring is optional if you are adding rear backup camera or rear seat entertainment. Otherwise you may tape this up somewhere. The two female connectors are for your factory radio plugs that ...2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio
After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that means there's an amp incompaitbility and this upgrade will not ...