UAS / UAQ Dealer Mode

UAS / UAQ Dealer Mode

On HVAC panel press and hold left temperature up/down and front defrost button, or the only temperature up/down buttons you have if you have single zone climate. This is for obtaining serial number and firmware version, if necessary.

    • Related Articles

    • Dealer Mode

      Method 1: Hold down the bottom corners of the touch screen for another way to enter dealer mode.  Method 2: STEP 1: • Put the system into ‘Dealer Mode’ • Hold the Driver Side Temp Up and Temp Down and Front Defrost buttons down at the same time for ...

    • UAQ / UAS requesting update after install

      After installing your Infotainment UAQ or UAS upgrade, if you had an 8 inch screened-unit in the vehicle before, over the air updates will still be retained. Please proceed forward once met with this message:

    • UAQ UAS UAG Acclimation Period upon Installation

      Any of the Uconnect 4 series radio units, such as the UAQ, UAS, UAG, UAV and UAX will require an acclimation period when first installed. Certain features may not be present until the acclimation period has ended, or odd activity can occur. ...

    • Can't navigate multiple camera inputs with UAQ/UAS upgrade

      If your vehicle has multiple cameras, such as a reverse, cargo and front camera, and you have the appropriate hardware to route which camera image appears in your radio head-unit's screen, note that not all of these functions will be retained when ...

    • Well everything seems to be working fine, I just don't have some icons on the bottom of the screen UAS in Jeep Cherokee

      Deeper Question:  Well I have the media one, but I used to have media and radio as two seperate ones, now I just have media so I have to go there then select satalite radio which is a pain, was nice having the icon and also looked better having the ...